Распиновка, расположение выводов и внешний вид разъема сетевого устройства:
Ethernet 1000Base-T
1000 Base-T uses all pairs for bidirectional traffic in the RJ45 connector.
Cables used should be of Category 5e(nhanced), even though Category 5 cables
usually works too.
(at the network interface cards/hubs)
(at
the cables)
RJ45 FEMALE CONNECTOR at the network interface cards/hubs.
RJ45 MALE CONNECTOR at the cables.
Pin
Name
Description
1
BI_DA+
Bi-directional pair A +
2
BI_DA-
Bi-directional pair A —
3
BI_DB+
Bi-directional pair B +
4
BI_DC+
Bi-directional pair C +
5
BI_DC-
Bi-directional pair C —
6
BI_DB-
Bi-directional pair B —
7
BI_DD+
Bi-directional pair D +
8
BI_DD-
Bi-directional pair D —
Contributor:
Niklas Edmundsson,
Source:
IEEE Std 802.3, 2000 Edition
Copyright © The Hardware Book Team 1996-2004.
May be copied and redistributed, partially or in whole, as appropriate.
Document last modified: 2002-01-10