Справочная информация и описание кабеля
Paravision SX1 to IDE
Can be used to connect a normal IDE harddisk to the Paravision SX1.
Paravision was formerly known as Microbotics.
(to the controller)
(to the Harddrive)
37 PIN D-SUB MALE to the controller.
40 PIN IDC FEMALE to the harddisk.
Description
D-Sub
IDC
Drive Reset
1
1
Data bit 0
2
17
Data bit 2
3
13
Data bit 4
4
9
Data bit 6
5
5
Ground
6
2
Data bit 8
7
4
Data bit 10
8
8
Data bit 12
9
12
Data bit 14
10
16
Ground
11+12
19
Ground
13+14
22
Ground
15+16
24
Ground
17
26
5V Power
18
n/c
5V Power
19
n/c
Ground
20
30
Data bit 1
21
21
Data bit 3
22
22
Data bit 5
23
23
Data bit 7
24
24
Ground
25
40
Data bit 9
26
26
Data bit 11
27
27
Data bit 13
28
28
Data bit 15
29
29
I/O Write
30
23
I/O Read
31
25
Interrupt Request
32
31
Address bit 2
33
36
Address bit 1
34
33
Address bit 0
35
35
Chip Select 1
36
38
Chip Select 0
37
37
Note: Pin 18+19 (+5V) can be used to power the harddisk. But
most harddisks require both +5V and +12V.
Contributor:
Joakim Цgren,
Kevin Hol?
Source:
?
Copyright © The Hardware Book Team 1996-2004.
May be copied and redistributed, partially or in whole, as appropriate.
Document last modified: 2002-01-13